Passer aux informations sur le produit
FiiO EA13 vacuum tube amplifier in silver, three-quarter view with the tube cover fitted
Bientôt disponible
Précommande et économise 5% avec le code EARLY5 — bientôt disponible.

FiiO EA13

  • 4 x EL34 Power Tubes
  • Pure Class A Push-Pull
  • 28 W + 28 W, 4/8 Ω Taps
€769,00
Prix promotionnel  €769,00 Prix régulier 
TVA incluse • B2B HT
i
Color
Bientôt · 2026-10

Me prévenir au lancement

Ce produit arrive bientôt. Laissez votre e-mail et nous vous préviendrons dès qu'il sera disponible à la commande — vous serez parmi les premiers. Une question ou une demande particulière ? Écrivez-la ci-dessous.

FiiO EA13 €769,00

Pas de spam — nous l'utilisons uniquement pour répondre à votre demande.

Payez en plusieurs fois Klarna
  • 3 × €256,33 Sans intérêt · 18+, conditions applicables
Voir le paiement en plusieurs fois
Livraison gratuite
Livraison gratuite dès €149 ou €4 en point relais. Nous l'expédions dès son arrivée — prévu 2026-10. En savoir plus
Retours sous 30 jours
Ça ne convient pas ? Retourne-le sous 30 jours et sois intégralement remboursé. En savoir plus
3 ans de garantie
Chaque produit inclut la garantie standard du fabricant. Prolonge ta garantie
Prix garanti
Trouvé moins cher ailleurs ? On s'aligne sur le prix. En savoir plus

FiiO EA13 – Full-Size Pure Class A Vacuum Tube Amplifier with EL34 Power Tubes

The EA13 is FiiO's first full-size valve amplifier, and it does not hedge: four JJ Electronic EL34 power tubes and two Sylvania NOS PCF80 small-signal tubes running a pure Class A push-pull circuit in pentode mode, into custom potted EI silicon-steel output transformers. Four RCA inputs, a real analogue volume potentiometer and backlit mechanical VU meters make it a complete integrated amplifier for a pair of passive speakers, and Soundium supplies it with full manufacturer warranty and local support.

Key Features

  • Six tubes, pure Class A: 4 × JJ Electronic EL34 in push-pull pentode mode, driven by 2 × Sylvania NOS PCF80 on the input and voltage stages
  • 28 W + 28 W into 4 Ω or 8 Ω: Rated at THD+N below 5%; at the stricter sub-1% threshold FiiO still specifies at least 18 W + 18 W per channel
  • Custom output transformers: EI silicon-steel laminate cores, epoxy-potted and sealed, wound for wide bandwidth and low noise
  • Separate 4 Ω and 8 Ω taps: Gold-plated binding posts for each impedance, so the amplifier is matched to the speaker rather than compromised across both
  • Four RCA inputs with rotary selector: An encoder-driven four-position switch and a high-quality analogue potentiometer, no digital volume anywhere in the path
  • LED-backlit mechanical VU meters: Dual-channel moving needles, with adjustable RGB lighting under the tube deck
  • 6.35 mm headphone output: 185 mW into 300 Ω for high-impedance headphones, driven from the same valve stage
  • CNC aluminium chassis: Aviation-grade machined front panel, unibody shell with electromagnetic shielding, vibration-damping feet and a removable perforated tube cover

Customer Benefits

Class A valve amplification is normally the expensive end of hi-fi, and the parts list is usually where budget designs give up. The EA13 spends its money where it is audible: NOS input tubes, properly potted transformers, Japanese NCC filter capacitors, axial metal-film coupling capacitors and an analogue potentiometer. Standby draws just over 1 W and a 30-minute auto-shutdown turns the amplifier off when the music stops, which matters on a design that idles at around 220 W. The tube cover stays on for households with curious hands and comes off when you want to watch the EL34s work.

Quick Specs

  • Topology: Pure Class A push-pull, pentode mode
  • Tubes: 4 × JJ Electronic EL34, 2 × Sylvania NOS PCF80
  • Speaker output: ≥ 28 W + 28 W into 4 Ω and 8 Ω (THD+N < 5%); ≥ 18 W + 18 W (THD+N < 1%)
  • Headphone output: ≥ 185 mW + 185 mW into 300 Ω; ≥ 60 mW + 60 mW into 32 Ω
  • Frequency response: 20 Hz – 60 kHz (attenuation below 2.9 dB)
  • Signal-to-noise ratio: ≥ 97 dB A-weighted (speaker output)
  • Noise floor: Below 150 µV A-weighted
  • Inputs: 4 × RCA line, 12 V trigger
  • Outputs: 4 Ω and 8 Ω speaker binding posts, 6.35 mm headphone
  • Dimensions: 43 × 33.9 × 14.5 cm (W×D×H)
  • Weight: 17.7 kg

What's in the Box

  • FiiO EA13 vacuum tube amplifier
  • Removable perforated tube cover (fitted)
  • AC power cord
  • Screwdriver and two screws
  • Quick start guide and warranty card

Ideal For

Listeners with efficient bookshelf or floorstanding speakers who want valve tone and a real Class A circuit without a five-figure budget, vinyl and CD owners feeding line-level sources straight into an analogue volume control, and anyone who wants the amplifier to be part of the room rather than hidden in a rack.

Pros & Cons

  • ✅ Six-tube pure Class A design with NOS input valves and potted custom transformers
  • ✅ Separate 4 Ω and 8 Ω taps, four line inputs and a proper analogue potentiometer
  • ✅ Mechanical VU meters and a removable cover make the tubes part of the design
  • ⚠️ Class A runs hot and idles near 220 W — it needs ventilation and clearance above the tubes
  • ⚠️ 17.7 kg and no remote control, so placement and volume are both hands-on
  • ⚠️ Line inputs only: no built-in DAC, phono stage or streaming

Final Word

The EA13 is the amplifier FiiO built once it had nothing left to prove about portable audio: heavy, hot, analogue and unapologetic about it. Order it from Soundium for authorised warranty, Lithuanian support and the same care after the sale as before it.

Comparatif
Avis
Vous aimerez peut-être aussi